Ceiling diffuser with fixed central element without damper Coated with high resistance electrostatic white paint aluminium colour
Extruded aluminium construction
Available in 1,2,3,4 ways
Flush frame
Measured Width by Height (A X B)
Movable curved fin supply diffuser for ceiling
Available with OB damper or multi-shutter damper
Final finish in high resistance electrostatic white paint or aluminum color
Constructed of extruded aluminum
Made with flat frame only
Available in 1,2,3,4 way (1 & 2 way)
The measurement is Width by Height (A X B)
Single fin supply grille with parallel multi-shutter damper
Grille available with vertical or horizontal fin
Final finish in high resistance electrostatic white paint or aluminum color
Constructed of extruded aluminum
Grille fins are supported on Polypropylene bushings
Available with:L-VM = Vertical front fins
Damper Actuator Lever (P)
The measurement is Width by Height (A X B)
Double fin supply grille without damper
Double deflection grating with vertical and horizontal fins for fall and dispersion control
Available with OB damper
Final finish in high resistance electrostatic white paint or aluminum color
Constructed of extruded aluminum
Fins supported on polypropylene bushings
Available with: L-VH = Vertical front fins and horizontal rear fins
The measurement is Width by Height (A X B)
Ceiling diffuser with fixed central element without damper Coated with high resistance electrostatic white paint aluminium colour
Extruded aluminium construction
Available in 1,2,3,4 ways
Flush frame
Measured Width by Height (A X B)
Movable curved fin supply diffuser for ceiling
Available with OB damper or multi-shutter damper
Final finish in high resistance electrostatic white paint or aluminum color
Constructed of extruded aluminum
Made with flat frame only
Available in 1,2,3,4 way (1 & 2 way)
The measurement is Width by Height (A X B)
Single fin supply grille with parallel multi-shutter damper
Grille available with vertical or horizontal fin
Final finish in high resistance electrostatic white paint or aluminum color
Constructed of extruded aluminum
Grille fins are supported on Polypropylene bushings
Available with:L-VM = Vertical front fins
Damper Actuator Lever (P)
The measurement is Width by Height (A X B)
Double fin supply grille without damper
Double deflection grating with vertical and horizontal fins for fall and dispersion control
Available with OB damper
Final finish in high resistance electrostatic white paint or aluminum color
Constructed of extruded aluminum
Fins supported on polypropylene bushings
Available with: L-VH = Vertical front fins and horizontal rear fins
The measurement is Width by Height (A X B)
Ventilation grille made of aluminum, with electrostatic powder paint coating.
Powder-coated aluminum prevents rust or paint deterioration over time.
Its architectural and lightweight design with perimeter frame allows it to be a suitable option for passive or forced ventilation on any type of ceiling or wall.
The curved fin design allows air to pass through easily.
It can be used for injection or extraction of air in any type of enclosure, whether residential or institutional.
For ventilation in interior spaces, walls, ceilings, bathrooms and easy installation.
Available with OB damper.
The measurement is Width by Height (A X B)
Ventilation grille with folding shutter that can be used for injection, air extraction or as an inspection cover
Made of extruded aluminum
The blind can be opened up to 90º downwards, its simple hinge system allows it to be manipulated by anyone without any tools.
Electrostatic powder coated aluminum prevents rust and paint deterioration over time
Interior panel with fixed fins
1” filter holder
Does not include filter / Optional filter L-F
The measurement is Width by Height (A X B)
Ventilation grille with folding shutter that can be used for injection, air extraction or as an inspection cover
Made of extruded aluminum
The blind can be opened up to 90º downwards, its simple hinge system allows it to be manipulated by anyone without any tools.
Electrostatic powder coating prevents rust and deterioration of the paint over time
Interior panel with grids
1” filter holder
Does not include filter / Optional filter L-F
The measurement is Width by Height (A X B)
Round ceiling diffuser made of aluminum
Final finish in high resistance electrostatic white paint or aluminum color
Includes installation collar (IR) – Additional Pricing Information
Optional round two-fin butterfly damper L-D2
Ventilation grille made of aluminum, with electrostatic powder paint coating.
Powder-coated aluminum prevents rust or paint deterioration over time.
Its architectural and lightweight design with perimeter frame allows it to be a suitable option for passive or forced ventilation on any type of ceiling or wall.
The curved fin design allows air to pass through easily.
It can be used for injection or extraction of air in any type of enclosure, whether residential or institutional.
For ventilation in interior spaces, walls, ceilings, bathrooms and easy installation.
Available with OB damper.
The measurement is Width by Height (A X B)
Ventilation grille with folding shutter that can be used for injection, air extraction or as an inspection cover
Made of extruded aluminum
The blind can be opened up to 90º downwards, its simple hinge system allows it to be manipulated by anyone without any tools.
Electrostatic powder coated aluminum prevents rust and paint deterioration over time
Interior panel with fixed fins
1” filter holder
Does not include filter / Optional filter L-F
The measurement is Width by Height (A X B)
Ventilation grille with folding shutter that can be used for injection, air extraction or as an inspection cover
Made of extruded aluminum
The blind can be opened up to 90º downwards, its simple hinge system allows it to be manipulated by anyone without any tools.
Electrostatic powder coating prevents rust and deterioration of the paint over time
Interior panel with grids
1” filter holder
Does not include filter / Optional filter L-F
The measurement is Width by Height (A X B)
Round ceiling diffuser made of aluminum
Final finish in high resistance electrostatic white paint or aluminum color
Includes installation collar (IR) – Additional Pricing Information
Optional round two-fin butterfly damper L-D2
Slot-type linear ventilation diffuser for installation in ceilings, manufactured in a width of up to 40 cm and unlimited length.
Final finish in high-resistance electrostatic white paint or aluminum color.
It can be used for forced or passive air injection or extraction, the center bars can be 1/2″, 3/4″ or 1″ apart.
Optional Plenum in 26 gauge galvanized sheet with expanded polyethylene foam insulation.
Optional round damper L-D for the plenum.
Its versatility allows you to make linear, L-shaped, C-shaped or square-shaped arrangements regardless of length.
Its architectural design allows it to be used in elegant, industrial, commercial, institutional or residential spaces.
For different sizes and finishes, consult the factory.
Linear bar grill type ventilation grille to install on ceilings or interior drywall walls, manufactured in widths up to 16″ and unlimited length.
Its versatility allows you to make linear, L-shaped, C-shaped or square-shaped arrangements regardless of length.
Final finish in high-resistance electrostatic white paint or aluminum color.
Constructed of extruded aluminum.
Optional Plenum in 26 gauge galvanized sheet with expanded polyethylene foam insulation.
It can be used for injection or extraction of forced or passive air, the slats can have deflection of 0º and 15º. The center panel is removable for easy assembly or maintenance.
Removable center panel.
Horizontal Fins (standard).
Available: L-BG = linear grating continuous wall system without damper.
Radial air supply.
Diffuser for high air volumes.
Greater performance for air distribution.
Available in measurements 24” x 24” for ceiling modules from 6” to 14”
Flat cone diffuser.
Total Diffuser for high air volumes.
Innovative and efficient central panel design.
National manufacturing.
With optional accessories: Radial damper and thermal insulation.
Made of 20 gauge galvanized sheet or aluminum.
Lid plus plenum design.
Air diffusion in 4 directions.
Avant-garde design.
Slot-type linear ventilation diffuser for installation in ceilings, manufactured in a width of up to 40 cm and unlimited length.
Final finish in high-resistance electrostatic white paint or aluminum color.
It can be used for forced or passive air injection or extraction, the center bars can be 1/2″, 3/4″ or 1″ apart.
Optional Plenum in 26 gauge galvanized sheet with expanded polyethylene foam insulation.
Optional round damper L-D for the plenum.
Its versatility allows you to make linear, L-shaped, C-shaped or square-shaped arrangements regardless of length.
Its architectural design allows it to be used in elegant, industrial, commercial, institutional or residential spaces.
For different sizes and finishes, consult the factory.
Linear bar grill type ventilation grille to install on ceilings or interior drywall walls, manufactured in widths up to 16″ and unlimited length.
Its versatility allows you to make linear, L-shaped, C-shaped or square-shaped arrangements regardless of length.
Final finish in high-resistance electrostatic white paint or aluminum color.
Constructed of extruded aluminum.
Optional Plenum in 26 gauge galvanized sheet with expanded polyethylene foam insulation.
It can be used for injection or extraction of forced or passive air, the slats can have deflection of 0º and 15º. The center panel is removable for easy assembly or maintenance.
Removable center panel.
Horizontal Fins (standard).
Available: L-BG = linear grating continuous wall system without damper.
Radial air supply.
Diffuser for high air volumes.
Greater performance for air distribution.
Available in measurements 24” x 24” for ceiling modules from 6” to 14”
Flat cone diffuser.
Total Diffuser for high air volumes.
Innovative and efficient central panel design.
National manufacturing.
With optional accessories: Radial damper and thermal insulation.
Made of 20 gauge galvanized sheet or aluminum.
Lid plus plenum design.
Air diffusion in 4 directions.
Avant-garde design.
Laminaire S.A.S is a Colombian company that was created in 1984, initially as a manufacturer of grilles, diffusers, and accessories for the HVAC market (heating, ventilation, air conditioning).
Over time, we have developed aluminum imported products for fronts, solar control, ceilings and bioclimatic applications with functional, standard and custom architectural designs.